Bulk LectoTreat

Plastic surface treater for three dimensional plastic parts requiring no orientation.

When orientation of your parts is not required, the Bulk LectroTreat surface treating system is the solution. The parts can be either bulk fed or randomly placed onto the treating conveyor. With the Bulk LectroTreat there is no lost time for any set up changes for different sizes, or shapes of parts. As long as the part fits within the treating tunnel, the entire outside surface of the part is treated evenly insuring adhesion.

Bulk LectroTreat Features & Benefits

Surface Treatment Levels >70 dynes/cm over the entire outside of three dimensional plastic partsAllows the decoration/adhesion on plastic parts without the use of costly primers or chemical wipes
Open Atmosphere PlasmaContinual process, no vacuum required, higher production rates
VersatilityNo set-up required for different shapes resulting in labor and production savings
No HeatZero scrap due to heat warping, surface crazing, stress relieving and paneling. Maintains the surface integrity of your plastic parts. Thin walling of parts made possible resulting in material savings
Safe EquipmentLower insurance premiums, no open flames
Efficient OperationLow cost power construction
Low Frequency 50-60HZNo interference with Electronic/PLC/Computers controls
Low MaintenanceOnly periodic cleaning necessary
PLC ControlsReliable and repeatable production rates, allows interface with entire production line
Cold Plasma360 degree uniform surface treatment guaranteed

Bulk LectroTreat Specifications

Input VoltageStandard 240 volt, 3 phase Any voltage can be accommodated.
Total Electrical LoadNot to exceed 8 KVA on standard units
CertificationUL, CSA or CE components
Equipment DimensionsStandard 43.5″ above floor
Other heights are available
Conveyor Heights37″ above the floor
Complete SystemsStandard unit includes surface treating, conveyor and exhaust systems.
Custom DesignAvailable upon request

Specifications are subject to change without notice. Guards are supplied and must be in place before operation. All sales are subject to our prevailing terms and conditions of sale. Other options available upon request.

Back to top of page